Proto-x SLT Manuel d'utilisateur télécharger pdf (Page 7)

SLT SETUP

The Proto-X SLT Nano Quadcopter can be used with other SLT controllers.

If your controller has programmable settings or if it uses an ANYLINK/

ANYLINK2 adapter, please use these settings as a guide to get started.

Tactic

TX650/Futaba

Type

Servo Reverse

Travel Adjustment

Dual Rates (D/R)

Exponential (EXPO)

Throttle Curve

Timer (TIMR)

AILE

ELEV THRO RUDD

234

AIRPLANE

5 Min

100% 100% 100% 100%

NNNN

025 75100

100/50 100/50 100/50

–25 –25 –25

Spektrum

w/Anylink2

™

Type

Servo Reverse

Travel Adjustment

Dual Rates (D/R)

Exponential (EXPO)

Throttle Curve

Timer (TIMR)

AILE

ELEV THRO RUDD

234

AIRPLANE

5 Min

100% 100% 100% 100%

RRRR

025 75100

100/50 100/50 100/50

25 0

Note: The LEDs cannot be toggled On/Off with an SLT controller. The

quadcopter can be flipped when the controller is on high rates.

LINKING THE QUADCOPTER

AND CONTROLLER

The Proto-X SLT uses Wavelink

™

technology to link it to the controller. If

all four blue LEDs are flashing and the quadcopter will not respond to any

commands, use the following procedure.

1. Turn off the controller but leave the

Proto-X SLT on.

2. Turn on the controller.

3. Immediately pick up the quadcopter and

wave it side to side for two seconds. Move

the quadcopter at a moderate speed at

least 12 inches in each direction.

4. Place the quadcopter on a level surface. The blue LEDs will flash on one

side then the other while the quadcopter is linking to the transmitter. The

LEDs will become steady when the quadcopter is linked to the controller.

SPARE/OPTIONAL PARTS

ESTE4615

Rotor Blade Set (4)

ESTE4616

USB Charge Cord

ESTE4617

Motor Set (4)

ESTE4618

LiPo 1S 3.7V 100 mAh

ESTE4622

Display Case

(Optional)

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Proto-x SLT Manuel d'utilisateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Jouets Proto-x SLT